Confirm your age
Please verify that you are 18 years of age or older to enter this site.
Order special instructions
86 products
86 products
Sort by:
From $0.86
Unit price perFrom $0.86
Unit price perFrom $1.23
Unit price per$2.00
Unit price perRAW Black Kingsize Slim are designed for the highest end smokers who prefer a longer smoke. This unique artisan paper is produced in the Alcoy region of Spain where the dry Valencian winds make humidity optimally low. RAW Black 1¼ is so thin that it allows you to truly taste your terps! RAW Black was created for a new generation as the next level of top shelf smoking materials. It’s like a Ferrari, it only runs on premium gas!
From $1.23
Unit price perFrom $0.75
Unit price perSMELLY PROOF STORAGE BAGS ARE DESIGNED TO CREATE AN “ECOSYSTEM” THAT BLOCKS VAPORS & OXYGEN FROM ENTERING OR EXITING THE NYLON REINFORCED FDA APPROVED POLY. SMELLY PROOF BAGS, WHETHER THE SMALLEST TO LARGEST COME WITH A DOUBLE-TRACK ZIPPER ENSURING THE TIGHTEST SEAL POSSIBLE.
From $24.99
Unit price perDiameter: 30 cm
Crystal catching bag
20 l/5 gal bucket required (not included)
If you do not want to waste a single resin gland, this is the bag for you!
The 25 micron bag is a great addition for your existing water and ice crystal separation set.
It will enable you to achieve the highest possible yield by collecting even the smallest trichomes.
Please note:
This bag drains rather slowly. Due to its exceedingly small screen size it takes quite some time for water to pass through.
Moreover, the 25 micron bag tends to catch dust particles and very small leaf fragments along with the super-mini crystals.
Weight | 0.150 kg |
---|---|
Dimensions | 19 x 16 x 2 cm |
Diameter: 30 cm
Working/filter bag
Capacity: ~200 g
20 l/5 gal bucket required (not included)
Part of the original water and ice bag system.
The 220 micron bag functions as the working bag for the Ice-O-Lator® system or as a filter bag for the Bubbleator® system.
All crystals pass through the screen of this bag while it retains the bulk of the plant material.
Weight | 0.150 kg |
---|---|
Dimensions | 19 x 16 x 2 cm |
Diameter: 50 cm
Crystal catching bag
75 l/20 gal bucket required (not included)
If you do not want to waste a single resin gland, this is the bag for you!
The 25 µm bag is an excellent addition for your existing water and ice crystal separation set. It will enable you to achieve the highest possible yield by collecting even the smallest trichomes.
Please note that this bag drains rather slowly. Due to its exceedingly small screen size it takes some time for water to pass through. Moreover, the 25 micron bag potentially catches dust particles and very small plant fragments along with the super-mini crystals.
Weight | 0.35 kg |
---|---|
Dimensions | 27 x 22 x 2 cm |
Pro tip:
Keep your water at or below 4°C (39.2°F), as it is the densest and therefore most effective in removing resin glands at this temperature.
The absolute prime quality is achieved by slowly and carefully stirring.
As the quality of your product declines as the plantmaterial continues to be stirred, we recommend working your material in several rounds to obtain separate batches with a quality gradient.
Weight | 2 kg |
---|---|
Dimensions | 80 x 80 x 50 cm |
Formerly known as “Indoor Set”
Bag diameter: 80 cm
Working bag (70 μm) holds ~1500g dry plant material
190 l/50 gal bucket required (not included)
This is the Large edition of our Ice-O-Lator® system, suitable for up to 1500 grams of dried plant material.
Pro tip:
Keep your water at or below 4°C (39.2°F), as it is the densest and therefore most effective in removing resin glands at this temperature.
The absolute prime quality is achieved by slowly and carefully stirring.
As the quality of your product declines as the plantmaterial continues to be stirred, we recommend working your material in several rounds to obtain separate batches with a quality gradient.
Weight | 2 kg |
---|---|
Dimensions | 80 x 80 x 50 cm |
Formerly known as “Indoor Set”
Bag diameter: 80 cm
Working bag (220 μm) holds ~1500g dry plant material
190 l/50 gal bucket required (not included)
This is the Large edition of our Ice-O-Lator® system, suitable for up to 1500 grams of dried plant material.
Pro tip:
Keep your water at or below 4°C (39.2°F), as it is the densest and therefore most effective in removing resin glands at this temperature.
The absolute prime quality is achieved by slowly and carefully stirring.
As the quality of your product declines as the plantmaterial continues to be stirred, we recommend working your material in several rounds to obtain separate batches with a quality gradient.
Weight | 2 kg |
---|---|
Dimensions | 80 x 80 x 50 cm |
$2.00
Unit price perAre you a backroller? I made something really special for you! These are not upside down – these are the new RAW Black Inside Out Papers made just for backrolling!! You guys asked for a special paper just for backrolling and I work for you, so here’s what I made for you! Each sheet is made inside out so the gumline is already facing down and away from you, perfect for backrolling! Backrolling is a very tricky roll, and I have the ultimate RAWspect for anyone who does it.
From $4.99
Unit price perNO NEED FOR SOAKING WITH THIS POWERFUL PIPE CLEANER. THIS IS THE SMALLER TRAVEL SIZE SO YOU CAN TAKE IT ANYWHERE. NO SCRUBBING REQUIRED, JUST POUR INTO YOUR PIECE AND SHAKE.
For Use on Water Pipe, Metal, Glass Pipe & Hookah cleaner
From $1.25
Unit price perThe RAW Clipper Lighter is definitely not your average lighter! Clipper CP11 Lighters are made in Spain from a super strong nylon material which flexes so no summertime heat explosions like cheap Chinese lighters!
RAW Clipper lighters are refillable, reflintable, eco-friendly, and designed to last a lifetime.
$34.99
Unit price perThe CannaBrush is transforming hand trimming. It's fast and ergonomic. Simply grab a stalk of properly dried flowers and brush from top to bottom until you've reached the desired look. Now, with most of the work done; grab a pair of scissors, cut all flowers off the stalk, and clip off remaining stems or foliage.
If you love trimming, and you want the best possible results, surgically trimming with scissors is going to be your best bet. Cultivators must make the choice between machine and hand trimming. Machine trimming has high upfront costs, decreased quality, but is fast. Traditional hand trimming can preserve quality if done carefully, but is the slowest method and comes at a premium cost. Using the brushing system, especially the assembly line method, preserves quality, improves speed, lowers costs, and is overall just more enjoyable.
$16.99
Unit price perThose louts who say you're a bit obsessive simply lack your refinement, your appreciation for detail-and your favorite "finishing touch" tool. They think you're laboring over every leaf and blossom, but you know that deadheading, shaping or pruning even the densest plants is as simple and quick as a precise, decisive snip.
From $13.40
Unit price per$8.70
Unit price perThis unit is intended for LEGAL purposes only, to be used in accordance with local laws and ordinances. Use only in well ventilated areas. This item will ship via Ground ONLY.