Fans / Ventilation / Ducting

Hurricane® Supreme Oscillating Wall Mount Fan 18 in

• Can be mounted wherever needed
• Energy efficient, low voltage
• Ultra quiet operation
• Great for small gardens
• Strong, easy-to-open clamp with rubber grips holds tight while preventing scratches
• Equipped with two-speed operation and adjustable tilt mechanism
• The mounting clip open

• Input Volts/Hz: 120V-60Hz
• Amps (A): 0.22-0.32A (Hi) / 0.15-0.25A (Lo)
• Power: 18W
• Fan Speed (Rpm): 2230 (Hi) / 2130 (Lo)
• Speeds: 2
• Air flow (CFM): 8.0 (Hi) (m3/min)
• Power cord length: 6 ft
• Blade size: 16cm
• Dimensions: 15.5 (W) x 21.5 (D) x 23.4 (H)
• Shipping Weight: 1.3 kg

German design, Swiss components, and precision manufacturing for over a decade.

At a Glance

The Original Can-Fan® S-Series are centrifugal fans utilizing our proven German design, Swiss components and precision manufacturing. They have carried AMCA certified numbers longer than most other fans have been around and you can be sure you’re getting every CFM we claim to deliver. The Can-Fan® can be easily installed in minutes using the included mounting bracket. They have a powder-coat finish. These fans are designed for demanding continuous operation with carbon air filters and long duct runs. 100% speed controllable.

Details

• AMCA Certified performance
• Proven Centrifugal Design
• Power Cord Attached
• German Engineered
• Reliable Swiss Motor
• Powder Coat Finish
• Easy installtion
• 5-year warranty
• Available in sizes from 4″ – 8″

Description

The Max-Fan® is the first fan that has been developed with a Computational Fluid Dynamics (CFD) program. CFDs are used for engineering aircraft propulsion engines. The perfectly designed 3D blades of the impeller and stator make this fan extremely powerful and energy efficient. Compared with other inline fans, the efficiency is 50%-100% higher. 6″ – 14″ come pre-wired with an 8 ft 120 V power cord. Can-Fan® bring its innovation to market and sets a new standard for performance. The Max-Fan® is a more powerful and efficient fan that takes less energy to run.

Details

• Manufactured in Germany
• Extremely energy efficient
• Optimized mixed flow is quieter than comparable fans
• Very high aerodynamic efficiency
• Lower operational cost than traditional centrifugal fans
• Easy installation
• 5-year warranty
• Available in sizes from 6″ – 28″
• Built-in 3-speed controller *not available on all models

Technical Data

• CFM: 1708 at 0wg
• RPM: 3374
• Max Watts: 489
• Amps: 4.1 @ 120v AC 60 Hz
• Diameter: 12″
• Length: 12.125″
• Blade Design: Mixed Flow
• Housing: Galvanized
• Inlet/Outlet: 12″

RECOMMENDED FILTERS

• Exhaust:

• Can-Lite 14×50 XL

• Recirculating:

• Can 75
• Can 100
• Can-Lite 12×40
• Can 125
• Can 150

Peflex 4P is an Un-insulated Flexible Air Duct connection consisting of two layers of pure aluminum and of two layers of a polyester binding a galvanized wire.

Peflex 4P is completely water and air tight, corrosion resistant and can withstand high static pressure.
High static pressure resistance is achieve by having a tight distance between helix (1 inch) and by having the thicker wall in the industry (0.0041’’/0,105mm).

Peflex 4P offer a high resistance to fire because of its unique quadruple laminating process leaving no flammable material exposed.
All adhesive use in the quadruple laminating process contain fire retardant even if those material are not exposed.

Peflex 4P has a much lower friction loss than regular cloth duct reducing the energy required by the system to move the air.

Detailed description
- Flame Speed : < 25
- Flame Development : < 50
- Maximum Velocity : 4000 ft/minute
- Continuous maximum Positive Pressure : 15’’ H20 (1.5 kPa)
- Continuous maximum Negative Pressure Temperature Range : 2.5’’ H20 (0.13 kPa)
- Maximum Temperature use : -20°F to 140°F continuous (at 4 inches H20) / -20°F to 180°F continuous (at 2 inches H20) / -20°F to 180°F continuous (at 1⁄2 inches H20)
- Flexible thickness : (0.0041’’/0,105mm)
- Size : 8" x 25'
- Available sizes : 4", 6", 8", 10", 12", 14"

Package includes
1x Peflex NON INSULATED FLEXIBLE DUCT 8" X 25'

Peflex 2PG is an insulated UL listed Flexible Air Connector consisting of four layers of polyester binding a galvanized wire.

Peflex 2PG is completely water and air tight, corrosion resistant and can withstand high static pressure (10po WC, 2.5 KPa).. High static pressure resistance is achieve by using the unique quadri-lamination process and by having a tight distance between helix (1.5 po, 38,1 mm) and by having a thick wall of (0.0033’’/0,085mm)

Peflex 2PG offer a high resistance to fire because of its unique quadruple laminating process using adhesive containing fire retardant.

Peflex 2PG has a much lower friction loss than regular cloth duct reducing the energy required by the system to move the air.

Peflex 2PG use John Manville Flexglass Formaldehyde free Insulation. John Manville Insulation is not an hazardous substance or mixture.

Detailed description
- Flame Spread : < 25
- Fume Spread : < 50
- Maximal Speed : 4000 pi/minute 15’’. H20 (3,7 kPa)
- Maximum Static Pressure in Continued Mode : 2.5’’. H20 (0.62 kPa) 
- Maximal Negative Static Pressure in Continued Mode : -30°F to 140°F continuously (to 4’’WC)
- Operative Temperature Range : -30°F à 250°F (-30°C à 121°C)
- Maximum Temperature Ranges in Continued Mode : -30°F to 180°F continuously (to 2 ’’WC)
- Vapor Barrier Material : Polyethylene
- Core Wall Thickness : 0.0041’’. (0,105mm)
- Vapor Barrier Thickness : 0.003’’ (0,0762mm)
- Size : 8" x 25'
- Available sizes : 4", 6", 8", 10", 12"

Package includes
1x Peflex INSULATED FLEXIBLE DUCT 8'' X 25'

The 6 in clip on fan has impact-resistant plastic grills with a chemical-resistant polypropylene blade, 2 speed and 1/300 HP motor.

The 12 in, 16 in and 18 in fans oscillate 90° or can be locked in a non-oscillating position. They also have a powder-coated steel front grill with impact-resistant plastic rear grill and chemical-resistant polypropylene blade.

• 12 in fan has 3 speeds and a 1/50 HP motor.
• 16 in fan has 3 speeds and a 1/20 HP motor.
• 18 in fan has 3 speeds and a 1/20 HP motor.

Peflex 4P is an Un-insulated Flexible Air Duct connection consisting of two layers of pure aluminum and of two layers of a polyester binding a galvanized wire.

Peflex 4P is completely water and air tight, corrosion resistant and can withstand high static pressure.
High static pressure resistance is achieve by having a tight distance between helix (1 inch) and by having the thicker wall in the industry (0.0041’’/0,105mm).

Peflex 4P offer a high resistance to fire because of its unique quadruple laminating process leaving no flammable material exposed.
All adhesive use in the quadruple laminating process contain fire retardant even if those material are not exposed.

Peflex 4P has a much lower friction loss than regular cloth duct reducing the energy required by the system to move the air.

Detailed description
- Flame Speed : < 25
- Flame Development : < 50
- Maximum Velocity : 4000 ft/minute
- Continuous maximum Positive Pressure : 15’’ H20 (1.5 kPa)
- Continuous maximum Negative Pressure Temperature Range : 2.5’’ H20 (0.13 kPa)
- Maximum Temperature use : -20°F to 140°F continuous (at 4 inches H20) / -20°F to 180°F continuous (at 2 inches H20) / -20°F to 180°F continuous (at 1⁄2 inches H20)
- Flexible thickness : (0.0041’’/0,105mm)
- Size : 4" x 25'
- Available sizes : 4", 6", 8", 10", 12", 14"

Package includes
1x Peflex NON INSULATED FLEXIBLE DUCT 4" X 25'