Confirm your age
Please verify that you are 18 years of age or older to enter this site.
Order special instructions
5 products
5 products
Sort by:
From $7.99
Unit price perAgrolux has a suitable reflector for almost every type of luminaire on the market. By using a joining piece we can make the Maxilux-reflectors fitting for all your luminaires.
Is the yield of your current thermoformed reflector not optimal anymore? And does it have no use to wash the reflector? Then we can anodise your reflector again. If you wish, we can take care of all the work and ensure that the reflector and the joining piece gets drilled loose. After the anodising process in Germany, the reflector will be tested again and assembled. Let the quality surprise you!
Do you want a better yield for your reflectors? Then we can clean them professionally. Each reflector will receive the care it needs. If needed, we will apply a coating after cleaning. Cleaning, coating and polishing of the coating, all gets done with one appliance: the semi-automatic carrousel. This was designed after extensive tests, closely working together with various bulb manufacturers. The results are very effective.
$279.99
Unit price perAll reparation kits are delivered with a full two-year warranty.
$480.99
Unit price perFrom $575.00
Unit price perWith the ALF1000 lighting luminaire, Agrolux once again proves that it is very capable of innovation. The ALF1000 2.1 is completely new and deviates off the beaten path. The electronic pre-connected lighting luminaires are provided with own or Philips electronics, a semi-open reflector (from Germany) with heat shield and a double-ended 1000watt bulb from Philips.
The ALF1000 housing is made of powder coated white aluminium and is extremely compact in design. With the use of energy efficient electronics, a big cooling fins’ surface and a heat shield, it stays remarkably cool. Do not let your decision be based on the position of the electronics but on the information we as a company can provide.
The ALF1000-luminaires are equipped with an electronic pre-switched ballast. Typical of the ALF1000 is the position of the electronic pre-switched ballast. As a standard, the electronic ballast used is supplied with a voltage protector, making damage due to overvoltage a thing of the past. Even in the case of voltage fluctuating, the electronics ensures a constant output. Agrolux uses their own EVSAs or Philips-drivers.
All luminaires are supplied with a low inrush current. The inrush current is the peak load that occurs when starting up an installation. By using a low inrush current it is possible to use cheaper switch materials.
The ALF1000’s reflector system is semi-closed. The system was developed and produced in Germany and ensures that the temperature of the bulb does not rise too high (maximum of ca. 500 degrees). If the temperature of the bulb gets too high (higher than 550 degrees) it can result in early wear and tear.
To ensure that the electronics stay cool, a heat shield is fitted on the reflector. The reflector can be dissembled very easily and can be easily cleaned.
The bulbs used are from the AUVL and Philips brands. The bulbs are delivered in the so-called double-ended design. The output of the AUVL/Philips-bulb improves every year; currently the warranty value is 2100umol at 100 hours. The bulbs have a warranty of four years with a maximum of 10 000 burning hours for these four years. The 1000w-bulb of AUVL and Philips is interchangeable.
Installation of the luminaires is simple. All our luminaires are equipped with Wieland-plug systems. This dust- and waterproof plug-and-play system, ensures faster and safer installation.