Confirm your age
Please verify that you are 18 years of age or older to enter this site.
129 products
129 products
Sort by:
Equipment
$115.00
Unit price per$115.00
Unit price perDescription
The TrolMaster pH probes provide accurate and reliable monitoring on the pH of the water being monitored by the Aqua-x. The PPH-1 probe connects to the Aqua-x via the AMP-2.
$160.00
Unit price per$160.00
Unit price perDescription
The AMP-2 module connects the Aqua-x to a set of precision pH / EC & temperature probes to constantly measure the pH / EC & temperature of the water being sampled. The AMP-2 works with the TrolMaster PCT-1&2 and the PPH-1&2 probes. Once connected to the Aqua-x, the AMP-2 will display the sensor data on the Aqua-x and on the APP. The minimum and maximum “limits” can be set on the Aqua-x providing 24/7 notification of pH / EC or temperatures that are out of limits.
$400.00
Unit price per$400.00
Unit price perThe Aqua-X system is a professional-grade irrigation control system. It is a fully customizable modular designed system. Installation is simple and the system is easy to expand upon. The Aqua-X is designed to control up to 30 separate irrigation zones (24vac solenoid valves or 120vac pumps), The Aqua-x monitors pH / EC and water temp as well as to monitor actual growing medium moisture levels by using up to (8) Water Content Sensors connected to a single Aqua-x controller. The timers can be set-up to be recycling timers, or to operate at specific time of day and durations. With the free TrolMaster App, the user can access all of the settings and alerts on the system from anywhere at anytime.
The NFS-1 is the brain of the Aqua-X system. It comes with a water detector WD-1 for leaking alert and watering confirmation.
*Internet Connection Note: TrolMaster's main controllers can be connected to the internet in order to use the available APP. Most internet services available including land-based and cellular internet are compatible. However, HughesNet / Viasat Satellite internet is NOT compatible with TrolMaster controllers at this time.
$80.00
Unit price per$80.00
Unit price perDescription
TrolMaster’s Hydro-X system can control most of the horticultural lighting fixtures sold on the market today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-X to control lights using their low-volt control option.
#AdapterDLMA12
This Lighting Control Adapter D (LMA-12) is specially designed for controlling D ballast.
#AdapterFLMA14
This LMA-14 lighting adapter is specially designed to control the HIDs like Gavita/Nanolux/Luxx/Growers Choice/Illuminar/PL and LEDs like Fluence/Next light/Photobio;
NOTE: Each LMA-14 can control up to 40 HID lights or 24 LEDs. Additional LMA-14 adapters can be used with the SPH-1 to control as many lights as required.
#AdapterPLMA11
This Lighting Control Adapter P (LMA-11) is specially designed for controlling P ballast.
#AdapterSLMA13
This Lighting Control Adapter S (LMA-13) is specially designed for controlling Sunsystem ballast (except SunSystem LEC 630).
$400.00
Unit price per$400.00
Unit price per
The Hydro-X system is the professional-grade single-zone environmental controller. It is a fully customizable modular designed system. Installation is simple and the system is easy to expand. The Hydro-X system can control mainstream grow lights, HVAC systems, mini-split air conditioners, commercial dehumidifiers and humidifiers, as well as CO2 generators or regulators. With the free TrolMaster App, a user could access all settings and alerts on the system from anywhere anytime.
From $1,260.00
Unit price perFrom $1,260.00
Unit price perDescription
#150Pint
The Ideal-Air™ Pro Series Ultra Sonic Humidifier is designed with ultra-sonic transducers to supply ultra-fine water particles. This is to help form a more balanced humidity field over your plant's entire canopy. Ideal-Air™ Pro Series Ultra Sonic Humidifier plates are made from cold-rolled steel and a stainless steel box with a standard water inlet with overflow safety switch, reservoir drain outlet, sediment filter, LED display and humidity control (30%–90%). This unit is designed to produce up to 150 pints per day of ultra-fine mist. 115 V, 60 Hz and 2.7 Amps. We recommend all Ultra Sonic Humidifiers be ducted, using 4 in PVC or 4 in DWV plastic pipe works best. Units should not be run without ducting or the top of the unit may be covered in water and shut off. Please don’t fill the unit through the discharge piping outlets. Doing this will overfill the tank and prevent the unit from creating humidity. The unit should only be filled through the provided hose and float valve to ensure proper water level and correct operation.
Description
#300Pint
The Ideal-Air™ Pro Series Ultra Sonic Humidifier is designed with ultra-sonic transducers to supply ultra-fine water particles. This is to help form a more balanced humidity field over your plant's entire canopy. Ideal-Air™ Pro Series Ultra Sonic Humidifier plates are made from cold-rolled steel and a stainless steel box with a standard water inlet with overflow safety switch, reservoir drain outlet, sediment filter, LED display and humidity control (30%–90%). This unit is designed to produce up to 300 pints per day of ultra-fine mist. 115 V, 60 Hz and 7.8 Amps. We recommend all Ultra Sonic Humidifiers be ducted, using 4 in PVC or 4 in DWV plastic pipe works best. Units should not be run without ducting or the top of the unit may be covered in water and shut off. Please don’t fill the unit through the discharge piping outlets. Doing this will overfill the tank and prevent the unit from creating humidity. The unit should only be filled through the provided hose and float valve to ensure proper water level and correct operation.
Description
#600Pint
The Ideal-Air™ Pro Series Ultra Sonic Humidifier is designed with ultra-sonic transducers to supply ultra-fine water particles. This is to help form a more balanced humidity field over your plant's entire canopy. Ideal-Air™ Pro Series Ultra Sonic Humidifier plates are made from cold-rolled steel and a stainless steel box with a standard water inlet with overflow safety switch, reservoir drain outlet, sediment filter, LED display and humidity control (30%–90%). This unit is designed to produce up to 600 pints per day of ultra-fine mist. 115 V, 60 Hz and 10.3 Amps. We recommend all Ultra Sonic Humidifiers be ducted, using 4 in PVC or 4 in DWV plastic pipe works best. Units should not be run without ducting or the top of the unit may be covered in water and shut off. Please don’t fill the unit through the discharge piping outlets. Doing this will overfill the tank and prevent the unit from creating humidity. The unit should only be filled through the provided hose and float valve to ensure proper water level and correct operation.
$23.99
Unit price per$23.99
Unit price per
Anden dehumidifiers are designed for maximum growth. The 5813 Multi-Pleat 11 is produced with a highly specialized, dual layered 100% synthetic media, specifically for use in Anden dehumidifiers. The Anden 5813 is composed of an upstream electrostatically enhanced layer (the E-Layer), and a downstream mechanical layer (the M-Layer). This replacement filter is easy to install, with no assembly or reinforcements to worry about. Protect your equipment for optimal performance.
- Replacement filter for ANDEN Dehumidifier Model: A320V1, A320V3
- MERV 11 Filter for Superior Equipment Protection
- Upgraded protection from standard pleated filters
- High holding capacity
- Anden Dehumidifiers are designed with easy access for simple filter changes
- Dimensions: 20 x 22 x 2
From $11.99
Unit price perFrom $11.99
Unit price per- Very low air resistance, easily changed.
- MERV-5 mesh blocks pollen, dust and other particulate from entering filter.
- Available in sizes for all filters.
- A clean Can-Filter Pre-Filter is an excellent way of extending the working life of your Can-Filter filter.
$351.99
Unit price per
From $9.99
Unit price perFrom $9.99
Unit price perINCREASER/REDUCER DUCTING
Transitions vent system to a larger diameter. Install in vertical orientation only. Additional configurations available upon request.
-Used to increase or decrease pipe size
-Durable galvanized steel construction
-Can be crimped if needed
$21.99
Unit price per
$169.99
Unit price per$169.99
Unit price perAt a Glance
The Original Can-Fan® S-Series are centrifugal fans utilizing our proven German design, Swiss components and precision manufacturing. They have carried AMCA certified numbers longer than most other fans have been around and you can be sure you’re getting every CFM we claim to deliver. The Can-Fan® can be easily installed in minutes using the included mounting bracket. They have a powder-coat finish. These fans are designed for demanding continuous operation with carbon air filters and long duct runs. 100% speed controllable.
Details
- AMCA Certified performance
- Proven Centrifugal Design
- Power Cord Attached
- German Engineered
- Reliable Swiss Motor
- Powder Coat Finish
- Easy installtion
- 5-year warranty
- Available in sizes from 4″ – 8″
$236.83
Unit price per$236.83
Unit price per
• Light proof design
• Quick & easy assembly
• New stronger frame with 19mm steel poles and high quality corners
• Big door offers easy access
• Multiple inlets and outlets for flexible installation
• Quick & easy assembly
• New stronger frame with 19mm steel poles and high quality corners
• Big door offers easy access
• Multiple inlets and outlets for flexible installation
$1,012.50
Unit price per$1,012.50
Unit price perUVONAIR IN-DUCT OZONE GENERATOR CD-1200 / 3 12''
Are you sure your odor is being eliminated? Be sure with UVONAIR®! The ONLY choice for quality INDUSTRIAL STRENGTH ODOR ELIMINATORS! It doesn't just mask odors, IT DESTROYS IT!
Uvonair® odor eliminators generate ozone, one of nature’s most effective oxidizing agents!
Ozone safely alters the molecular structure of offensive micro-organisms, to eliminate odors.
The Uvonair® CD-1200 In-Duct Ozone Model is a high output Corona Discharge generator that produces more ozone than any others known at this time.
It is adjustable to match the ozone demand load for odor control as well as provide energy conservation in low demand periods.
The CD generator does not require servicing.
Features:
Ideal for rooms from 40,000 cu.ft. (1200 m3) up to 100,000 cu.ft. (3000 m3)
Installs into 12 inch (30 cm) ducts to treat the air as it is being exhausted
Adjustable (HIGH/LOW/OFF) switch. The Uvonair® CD-1200 will produce very high levels of ozone at its high setting. Determine the ozone level required by monitoring the exhaust air for odors. Levels may vary throughout the growing cycle. - For extreme odors, it is better to use this higher output unit than smaller Uvonair® CD models.
Can be installed into other size ducts using adapters* (however, larger ducts may compromise airflow). Uvonair® CD models are recommended in larger ducts and high odor situations.
Works in areas with high HUMIDITY
Works in a wide range of TEMPERATURES
DEODORIZES grow rooms
ENVIRONMENTALLY FRIENDLY creating no hazardous waste!
Full one year warranty
No maintenance required
*Adapters not included; use with ventilation system
Installation:
Position the Uvonair® CD In-Duct Odor Eliminator generator, where possible, a minimum of 15 ft. (5 m) from the end of the exhaust duct to ensure adequate reaction time with odors. We recommend a minimum of 15 ft. (5m) of ductwork.
When using a fan, always put the ozonator on the output side of the fan.
Requires 110V 60Hz electrical power
Install in accordance to local electrical standards.
As a safety feature, the Uvonair® CD unit must be working in tandem with the ventilation exhaust fan.
Follow manufacturers’ instructions regarding synchronizing with the ventilation fan.
Uvonair® CD is equipped with a 6 ft (2m) cord with a grounded three-prong plug and a surge protection fuse.
Contact qualified personnel to install the proper outlet.
Do not alter the plug in any way.
Use caution to keep all electrical connections dry.
Detailed description
Uvonair® CD-1200
12 inch In-Duct System
For areas 40,000 cu.ft. (1200 m3) up to 100,000 cu.ft (3000 m3)
Package includes:
1x uvOnair In-Duct CD-1200/3 12" Ozone Generator
Uvonair® odor eliminators generate ozone, one of nature’s most effective oxidizing agents!
Ozone safely alters the molecular structure of offensive micro-organisms, to eliminate odors.
The Uvonair® CD-1200 In-Duct Ozone Model is a high output Corona Discharge generator that produces more ozone than any others known at this time.
It is adjustable to match the ozone demand load for odor control as well as provide energy conservation in low demand periods.
The CD generator does not require servicing.
Features:
Ideal for rooms from 40,000 cu.ft. (1200 m3) up to 100,000 cu.ft. (3000 m3)
Installs into 12 inch (30 cm) ducts to treat the air as it is being exhausted
Adjustable (HIGH/LOW/OFF) switch. The Uvonair® CD-1200 will produce very high levels of ozone at its high setting. Determine the ozone level required by monitoring the exhaust air for odors. Levels may vary throughout the growing cycle. - For extreme odors, it is better to use this higher output unit than smaller Uvonair® CD models.
Can be installed into other size ducts using adapters* (however, larger ducts may compromise airflow). Uvonair® CD models are recommended in larger ducts and high odor situations.
Works in areas with high HUMIDITY
Works in a wide range of TEMPERATURES
DEODORIZES grow rooms
ENVIRONMENTALLY FRIENDLY creating no hazardous waste!
Full one year warranty
No maintenance required
*Adapters not included; use with ventilation system
Installation:
Position the Uvonair® CD In-Duct Odor Eliminator generator, where possible, a minimum of 15 ft. (5 m) from the end of the exhaust duct to ensure adequate reaction time with odors. We recommend a minimum of 15 ft. (5m) of ductwork.
When using a fan, always put the ozonator on the output side of the fan.
Requires 110V 60Hz electrical power
Install in accordance to local electrical standards.
As a safety feature, the Uvonair® CD unit must be working in tandem with the ventilation exhaust fan.
Follow manufacturers’ instructions regarding synchronizing with the ventilation fan.
Uvonair® CD is equipped with a 6 ft (2m) cord with a grounded three-prong plug and a surge protection fuse.
Contact qualified personnel to install the proper outlet.
Do not alter the plug in any way.
Use caution to keep all electrical connections dry.
Detailed description
Uvonair® CD-1200
12 inch In-Duct System
For areas 40,000 cu.ft. (1200 m3) up to 100,000 cu.ft (3000 m3)
Package includes:
1x uvOnair In-Duct CD-1200/3 12" Ozone Generator
$1,012.50
Unit price per$1,012.50
Unit price perUvonair in-duct 12" CD-1200
Eliminates odors, molds, mildew and bacteria. Ozone safely alters the molecular structure of offensive micro-organisms, to eliminate smells from plants, pets, cooking, and smoke. It also kills mold, mildew and bacteria.
The Uvonair® CD-1200 In-Duct Ozone Model is a high output Corona Discharge generator that produces more ozone than any others known at this time. It is adjustable to match the ozone demand load for odor control as well as provide energy conservation in low demand periods. The CD generator does not require servicing.
Features:
*Adapters not included; use with ventilation system