ONA Mist

ONA Mist comes conveniently packaged in aerosol cans for use wherever odors occur. The ONA Mist cans hold 170 grams or 6 ounces of ONA, and are small enough to store practically anywhere. ONA is very powerful and will neutralize odors in garages, restaurants, bathrooms, hotel rooms, kitchens, smoking rooms, or any place in your home or small business facility.

Click here for information on the great ONA Mist Dispenser, which will provide you with 24 hour odor control in all those critical areas.

ONA is Safe

ONA is safe to use near children, pets or food because its constituents are organic. Use the same caution that you would with any other aerosol can and keep away from flame or other heat sources.

Available in our popular scents: PRO, Fresh Linen and Apple Crumble.

Description

The Max-Fan® is the first fan that has been developed with a Computational Fluid Dynamics (CFD) program. CFDs are used for engineering aircraft propulsion engines. The perfectly designed 3D blades of the impeller and stator make this fan extremely powerful and energy efficient. Compared with other inline fans, the efficiency is 50%-100% higher. 6″ – 14″ come pre-wired with an 8 ft 120 V power cord. Can-Fan® bring its innovation to market and sets a new standard for performance. The Max-Fan® is a more powerful and efficient fan that takes less energy to run.

Details

• Manufactured in Germany
• Extremely energy efficient
• Optimized mixed flow is quieter than comparable fans
• Very high aerodynamic efficiency
• Lower operational cost than traditional centrifugal fans
• Easy installation
• 5-year warranty
• Available in sizes from 6″ – 28″
• Built-in 3-speed controller *not available on all models

Technical Data

• CFM: 1708 at 0wg
• RPM: 3374
• Max Watts: 489
• Amps: 4.1 @ 120v AC 60 Hz
• Diameter: 12″
• Length: 12.125″
• Blade Design: Mixed Flow
• Housing: Galvanized
• Inlet/Outlet: 12″

RECOMMENDED FILTERS

• Exhaust:

• Can-Lite 14×50 XL

• Recirculating:

• Can 75
• Can 100
• Can-Lite 12×40
• Can 125
• Can 150

Peflex 4P is an Un-insulated Flexible Air Duct connection consisting of two layers of pure aluminum and of two layers of a polyester binding a galvanized wire.

Peflex 4P is completely water and air tight, corrosion resistant and can withstand high static pressure.
High static pressure resistance is achieve by having a tight distance between helix (1 inch) and by having the thicker wall in the industry (0.0041’’/0,105mm).

Peflex 4P offer a high resistance to fire because of its unique quadruple laminating process leaving no flammable material exposed.
All adhesive use in the quadruple laminating process contain fire retardant even if those material are not exposed.

Peflex 4P has a much lower friction loss than regular cloth duct reducing the energy required by the system to move the air.

Detailed description
- Flame Speed : < 25
- Flame Development : < 50
- Maximum Velocity : 4000 ft/minute
- Continuous maximum Positive Pressure : 15’’ H20 (1.5 kPa)
- Continuous maximum Negative Pressure Temperature Range : 2.5’’ H20 (0.13 kPa)
- Maximum Temperature use : -20°F to 140°F continuous (at 4 inches H20) / -20°F to 180°F continuous (at 2 inches H20) / -20°F to 180°F continuous (at 1⁄2 inches H20)
- Flexible thickness : (0.0041’’/0,105mm)
- Size : 8" x 25'
- Available sizes : 4", 6", 8", 10", 12", 14"

Package includes
1x Peflex NON INSULATED FLEXIBLE DUCT 8" X 25'

Peflex 2PG is an insulated UL listed Flexible Air Connector consisting of four layers of polyester binding a galvanized wire.

Peflex 2PG is completely water and air tight, corrosion resistant and can withstand high static pressure (10po WC, 2.5 KPa).. High static pressure resistance is achieve by using the unique quadri-lamination process and by having a tight distance between helix (1.5 po, 38,1 mm) and by having a thick wall of (0.0033’’/0,085mm)

Peflex 2PG offer a high resistance to fire because of its unique quadruple laminating process using adhesive containing fire retardant.

Peflex 2PG has a much lower friction loss than regular cloth duct reducing the energy required by the system to move the air.

Peflex 2PG use John Manville Flexglass Formaldehyde free Insulation. John Manville Insulation is not an hazardous substance or mixture.

Detailed description
- Flame Spread : < 25
- Fume Spread : < 50
- Maximal Speed : 4000 pi/minute 15’’. H20 (3,7 kPa)
- Maximum Static Pressure in Continued Mode : 2.5’’. H20 (0.62 kPa) 
- Maximal Negative Static Pressure in Continued Mode : -30°F to 140°F continuously (to 4’’WC)
- Operative Temperature Range : -30°F à 250°F (-30°C à 121°C)
- Maximum Temperature Ranges in Continued Mode : -30°F to 180°F continuously (to 2 ’’WC)
- Vapor Barrier Material : Polyethylene
- Core Wall Thickness : 0.0041’’. (0,105mm)
- Vapor Barrier Thickness : 0.003’’ (0,0762mm)
- Size : 8" x 25'
- Available sizes : 4", 6", 8", 10", 12"

Package includes
1x Peflex INSULATED FLEXIBLE DUCT 8'' X 25'

The 6 in clip on fan has impact-resistant plastic grills with a chemical-resistant polypropylene blade, 2 speed and 1/300 HP motor.

The 12 in, 16 in and 18 in fans oscillate 90° or can be locked in a non-oscillating position. They also have a powder-coated steel front grill with impact-resistant plastic rear grill and chemical-resistant polypropylene blade.

• 12 in fan has 3 speeds and a 1/50 HP motor.
• 16 in fan has 3 speeds and a 1/20 HP motor.
• 18 in fan has 3 speeds and a 1/20 HP motor.

Description

#Station1TS1

The TS-1 thermostat stations is designed to replace a thermostat connected to a conventional cool only HVAC unit. The TS-1 is wired to the HVAC system using the same low-voltage thermostat cable, and has the standard color-coded wiring as most thermostats. The Hydro-x allows separate Day and Night settings for each of up to (4) TS  modules so multiple HVAC systems can be controlled by a single Hydro-X system. 

Description

#Station2TS2

The TS-2 thermostat stations is designed to replace a thermostat connected to a standard HVAC unit. The TS-2 can be used to control most HVAC systems including heat pump and multi-stage HVAC systems. The  TS-2 is wired to the HVAC system using the same low-voltage thermostat cable, and has the standard color-coded wiring as most thermostats. The Hydro-x allows separate Day and Night settings for each of up to (4) TS  modules, so multiple HVAC systems can be controlled by a single Hydro-X system. The TS-2 also has an adjustable delay time for each HVAC systems being activated. That minimizes high start-up (inrush current) and allows up to 4 HVAC systems to be safely controlled.

ONA Block

The ONA Block is ideal for small areas such as closets, foyers, attics, cars, gym bags, boats, kitchens, garbage cans, cupboards or vents. Simply remove the cap, or punch several small holes in the cap and place in desired location. The ONA Block measures 3″ x 3″ and will fit in most places.

The ONA Block will release its powerful odor neutralizing agent and keep the location free from undesirable odors. Replace as necessary.

Available in our popular scents: PRO, Fresh Linen and Apple Crumble.

ONA Mist Dispenser

The ONA Mist Dispenser is a great way to control odors in small rooms and areas where the odor source is constant or repeated. Rooms such as bathrooms, entry or exit areas, pantries, workshops, and garbage collection areas that are approximately 6,000 cubic feet (170 sq. meters) are aptly serviced with an ONA Mist Dispenser – under normal airflow conditions. Larger areas are best controlled with one of our larger CFM dispensers such as the ONA Breeze or ONA Odor Stop.

Note: Mist Cans Sold Separately

Features

The ONA Mist Dispenser has an electronic eye that senses bright light or low light. You can set it to only spray in the dark (low light) or during the day (or when lights are normally on). The third option allows you to set it to spray 24 hours per day.

The spray is metered out in three adjustable time intervals – 7.5 minutes, 15 minutes, or 30 minutes.

Startup Instructions

Customers often think the Dispenser isn’t working when they install the batteries. (requires 2 AA batteries)

It is likely that it just seems like it is not working as the unit does not spray right away after the batteries are inserted into the unit and the door closed on the unit. There is a trigger switch that engages when the door is closed (often mistaken for a switch to push to make the unit spray once).

With new batteries and the door closed on the unit, it should begin spraying after the time interval that was set on the inside of the unit. Also make sure the unit is set to day or 24 hours if you are just testing to see if it is working.

Additional Applications

The ONA Mist Dispenser is designed to fit most standard 6 ounce aerosol cans, and can be used to dispense pesticides or other aerosols.

• USCO2 – ULTRA SIMPLE CO2 CONTROLLER

  No bells and whistle, just connect your CO2 generator and you’re set!
  This is Grozone’s beginner solution for growers looking for affordable and easy-to-use CO2 controller.

  • User can select one among five preset CO2 control values (1000, 1125, 1250, 1375 and 1500 PPM)
  • User can select one among five preset Elevation values for improved CO2 control in higher altitudes (sea level, 1000, 3000, 5280, 7000 feet)
  • 3-LED Display shows ambient CO2 value (7 ranges between 500 and 2000 PPM) 
  • Day/Night detection to turn off CO2 enrichment during the night 
  • One-button calibration in fresh air (400 PPM) 
  • 5 Amps Output (for CO2 burner valve or regulator coil)

Peflex 4P is an Un-insulated Flexible Air Duct connection consisting of two layers of pure aluminum and of two layers of a polyester binding a galvanized wire.

Peflex 4P is completely water and air tight, corrosion resistant and can withstand high static pressure.
High static pressure resistance is achieve by having a tight distance between helix (1 inch) and by having the thicker wall in the industry (0.0041’’/0,105mm).

Peflex 4P offer a high resistance to fire because of its unique quadruple laminating process leaving no flammable material exposed.
All adhesive use in the quadruple laminating process contain fire retardant even if those material are not exposed.

Peflex 4P has a much lower friction loss than regular cloth duct reducing the energy required by the system to move the air.

Detailed description
- Flame Speed : < 25
- Flame Development : < 50
- Maximum Velocity : 4000 ft/minute
- Continuous maximum Positive Pressure : 15’’ H20 (1.5 kPa)
- Continuous maximum Negative Pressure Temperature Range : 2.5’’ H20 (0.13 kPa)
- Maximum Temperature use : -20°F to 140°F continuous (at 4 inches H20) / -20°F to 180°F continuous (at 2 inches H20) / -20°F to 180°F continuous (at 1⁄2 inches H20)
- Flexible thickness : (0.0041’’/0,105mm)
- Size : 4" x 25'
- Available sizes : 4", 6", 8", 10", 12", 14"

Package includes
1x Peflex NON INSULATED FLEXIBLE DUCT 4" X 25'