Products

Fabric & Sod Staples

6" x 1" x 6"

LIAFLOR CLAY PELLETS 8 - 16MM 1L 

Liaflor Clay Pellets 8 - 16 mm 1L. Liaflor is a ceramic, purely mineral substrate made out of expanded clay. 

The basic material is natural, expandable clay which is expanded while it is burnt at 1200C in rotary kiln and then screened out. 
Liaflor is germ-free as well as chemically and biologically neutral.

Note: this item is sold out of the bag. Broken down from a 50L bag

• Clean and odour-free
• Prevention of soil pests
• Ideal plant growth
• Simple, trouble-free plant care
• Easy, efficient fertilization

220/240V ETL Rated Power Cord

8 feet long

for the Equinox 600 / 1000

Description

Light Rail 3.5 IntelliDrive Motor:

Light System: The Light Rail 3.5 IntelliDrive Motor is our most popular light mover, it will move any grow light and travels approximately 4 feet (1.2m) per minute. The  LightRail grow light mover has a 0 to 60-second adjustable time delay, and that grow equipment feature is for pausing the indoor grow light at both ends of its travels, promoting even growth and yield from end to end. It also has adjustable travel distance and comes with preinstalled Extreme Duty Trolley Wheels now as standard. See specific indoor growing systems product details farther below. 

Note: Light Rail 3.5 works with 110 volt only and does not work with 220 volt electrical.

Additional Information 

• Light Rail 3.5 IntelliDrive Motor Only
• No Rails Included
• Extreme Duty Trolley Wheels Now as Standard
• Light Mover Grow

Specifications

Description

LightRail Add-A-Lamp Kit, Extreme Duty Trolley Wheels Now as Standard: 

As part of your grow equipment, this is the easiest way to move a second or third indoor garden light all from your one LightRail light mover motor, and now with pre-installed Extreme Duty Trolley Wheels which are rated to 60 lbs. Compatible with your existing LightRail 3.0, 3.5, 4.0 or 4.20 grow light system, the Add A Lamp Kit allows for extended coverage for an additional grow lamp in-line, along with adjustable run length and indoor grow light spacing. The Add A Lamp Kit includes a two-piece, 2 meter light mover rail (6’6” total length), a 6’ push/pull rod, an Auxiliary Trolley, hardware, and instructions. It comes complete.

Additional Information 

With the LightRail Add A Lamp Kit, multiple indoor grow lights can be moved:

Note: Up to three indoor grow lights can be moved in-line with this grow light system. For the three indoor garden light configurations, you would have this: There would be a LightRail Add-A-Lamp Kit, then a LightRail 3.5 or a LightRail 4.0 Kit then another LightRail Add-A-Lamp Kit. For moving two indoor grow lights in-line, you would have a LightRail 3.5 or 4.0 Kit and then an Add-A-Lamp Kit. Also note, the LightRail 4.20 Kit (see product page) comes with one Add-A-Lamp Kit included.

Hint: For a tighter fit, the Add-A-Lamp Kit together with your LightRail 3.5 or 4.0 Kit can be used with light mover rail halves only. And, that DIY light mover configuration would have 1-3 foot gaps in between the light mover rail halves. So, this allows for more grow light system space flexibility. And, the indoor plant light will fill into the gap areas from both sides. This grow light system configuration gives good grow lamp coverage for the entire area including the “gap plants”.

Suggested travel distance? About 3’-4’ (1m) Switch Stop to Switch Stop. This will likely light up the 6’6” (2m) Rail length nicely, as half the light from your lamp goes beyond that stopper setting and this happens at both ends of the lamp’s travel, with grow light pattern coverage going even farther.

Suggested time delay setting? At 3’-4’ (1m) of travel, a time delay setting of about 20-30 seconds might be just right. You can then see over time if any adjustments are needed.

Manufactured by Gualala Robotics and a part of the LightRail brand. It’s all about quality constructed, instrument grade robotics. Made in the USA and you can only get this with LightRail by Gualala Robotics.

Specifications

Description

Auxiliary Trolley:

The LightRail Auxiliary Trolley with Extreme Duty Trolley Wheels now as standard, and rated to 60 lbs. It is compatible with LightRail 3.0, 3.5, 4.0 and 4.20 and has many indoor grow equipment uses.

It is the same Auxiliary Trolley that you would find in the Add A Lamp Kit. For uses, in addition to moving a second indoor grow light as part of the Add A Lamp Kit, it can also be used to aid in the securing of any vent tubing or grow light cords.

Additional Information

There are many uses for the LightRail Auxiliary Trolley

In addition to being used to move a second grow lamp as part of the Add-A-Lamp Kit, it can also be used in the securing of vent tubing and indoor grow light power cords. And in this instance, as your LightRail Motor goes along the rail in one direction, it gently pushes the ductwork or cords out in front. Then, as the LightRail Motor goes in the other direction, it gently pulls ductwork or cords along behind. The LightRail Auxiliary Trolley is sold on its own, as shown, to provide available extra Trolleys. And, it can be used for a variety of purposes. And, to see three clever hacks for this accessory grow equipment.

Manufactured by Gualala Robotics and a part of the LightRail brand. It’s all about quality constructed, instrument grade robotics. You can only get this with LightRail by Gualala Robotics.

The LightRail grow light system can do this

How does a LightRail grow light setup work? LightRail turns the indoor grow lights of our indoor growing kit into the best grow lights they can be. See how this works: Grow Lamp Bravery – Yield as a Verb for Indoor Growing Systems.

And, see how this works as part of the automation for our grow light systems.

Specifications

Description

Additional Information

How does a LightRail grow light setup work?

How does a LightRail grow light setup work? LightRail turns the lights of our indoor growing systems into the best grow equipment lights they can be. See how this works: Grow Lamp Bravery – Yield as a Verb for Indoor Growing Systems. And, see the benefits of automation for our grow light systems: Growlight System Automation.

Trolley wheels are easy to install

Trolley wheels are easy to exchange and easy to install. And, there is even a “how to” video. So, use that link and simply scroll to the bottom of the video page.

Specifications

LightEnerG™ Female Lamp Cords with Bare Wire Ends are used between a ballast and a male lamp cord and can turn any ballast into a LightEnerG™ compatible ballast. It can also be used to plug into the end of LightEnerG™ fixtures to have a bare wire end.

Description