Confirm your age
Please verify that you are 18 years of age or older to enter this site.
Order special instructions
1300 products
1300 products
Sort by:
From $35.99
Unit price perFrom $24.99
Unit price perDiameter: 30 cm
Crystal catching bag
20 l/5 gal bucket required (not included)
If you do not want to waste a single resin gland, this is the bag for you!
The 25 micron bag is a great addition for your existing water and ice crystal separation set.
It will enable you to achieve the highest possible yield by collecting even the smallest trichomes.
Please note:
This bag drains rather slowly. Due to its exceedingly small screen size it takes quite some time for water to pass through.
Moreover, the 25 micron bag tends to catch dust particles and very small leaf fragments along with the super-mini crystals.
Weight | 0.150 kg |
---|---|
Dimensions | 19 x 16 x 2 cm |
Diameter: 30 cm
Working/filter bag
Capacity: ~200 g
20 l/5 gal bucket required (not included)
Part of the original water and ice bag system.
The 220 micron bag functions as the working bag for the Ice-O-Lator® system or as a filter bag for the Bubbleator® system.
All crystals pass through the screen of this bag while it retains the bulk of the plant material.
Weight | 0.150 kg |
---|---|
Dimensions | 19 x 16 x 2 cm |
Diameter: 50 cm
Crystal catching bag
75 l/20 gal bucket required (not included)
If you do not want to waste a single resin gland, this is the bag for you!
The 25 µm bag is an excellent addition for your existing water and ice crystal separation set. It will enable you to achieve the highest possible yield by collecting even the smallest trichomes.
Please note that this bag drains rather slowly. Due to its exceedingly small screen size it takes some time for water to pass through. Moreover, the 25 micron bag potentially catches dust particles and very small plant fragments along with the super-mini crystals.
Weight | 0.35 kg |
---|---|
Dimensions | 27 x 22 x 2 cm |
Pro tip:
Keep your water at or below 4°C (39.2°F), as it is the densest and therefore most effective in removing resin glands at this temperature.
The absolute prime quality is achieved by slowly and carefully stirring.
As the quality of your product declines as the plantmaterial continues to be stirred, we recommend working your material in several rounds to obtain separate batches with a quality gradient.
Weight | 2 kg |
---|---|
Dimensions | 80 x 80 x 50 cm |
Formerly known as “Indoor Set”
Bag diameter: 80 cm
Working bag (70 μm) holds ~1500g dry plant material
190 l/50 gal bucket required (not included)
This is the Large edition of our Ice-O-Lator® system, suitable for up to 1500 grams of dried plant material.
Pro tip:
Keep your water at or below 4°C (39.2°F), as it is the densest and therefore most effective in removing resin glands at this temperature.
The absolute prime quality is achieved by slowly and carefully stirring.
As the quality of your product declines as the plantmaterial continues to be stirred, we recommend working your material in several rounds to obtain separate batches with a quality gradient.
Weight | 2 kg |
---|---|
Dimensions | 80 x 80 x 50 cm |
Formerly known as “Indoor Set”
Bag diameter: 80 cm
Working bag (220 μm) holds ~1500g dry plant material
190 l/50 gal bucket required (not included)
This is the Large edition of our Ice-O-Lator® system, suitable for up to 1500 grams of dried plant material.
Pro tip:
Keep your water at or below 4°C (39.2°F), as it is the densest and therefore most effective in removing resin glands at this temperature.
The absolute prime quality is achieved by slowly and carefully stirring.
As the quality of your product declines as the plantmaterial continues to be stirred, we recommend working your material in several rounds to obtain separate batches with a quality gradient.
Weight | 2 kg |
---|---|
Dimensions | 80 x 80 x 50 cm |
$546.00
Unit price perFrom $1,250.00
Unit price perIdeal-Air™ Pro Series 100 Pint Dehumidifier has automatic restart if power is lost. Easy-to-use digital display humidity readings, internal condensate pump, removable washable filter, 1 speed fan motor, powder-coated metal casing for long life and a heavy-duty compressor. Built-in defrost that is designed for operation down to 41°F. Set upright on their feet for 3 hrs prior to use. 100 pint unit: Temp. Range: 41°F–95°F, condensation removal: (24 hrs) 100 pints (86°F, 80% RH); Power: 6.75 Amps/728 W; Supply Voltage: 115 V - 1 Phase - 60 Hz; R410A. Ideal-Air™ recommends that dehumidifiers use surge protectors and a dedicated electrical circuit. In the event of a power failure, a spike in voltage may occur when the power is reinstated. This can damage the circuit board, which is not covered under warranty.
Ideal-Air™ Pro Series 180 Pint Dehumidifier has automatic restart if power is lost. Easy-to-use digital display humidity readings, internal condensate pump, removable washable filter, 1 speed fan motor, powder-coated metal casing for long life and a heavy-duty compressor. Built-in defrost that is designed for operation down to 41°F. Set upright on their feet for 3 hrs prior to use. 180 pint unit: Temp. Range: 41°F–95°F, condensation removal: (24 hrs) 180 pints (86°F, 80% RH); Power: 12.31 Amps/1350 W; Supply Voltage: 115 V - 1 Phase - 60 Hz; R410A. Ideal-Air™ recommends that dehumidifiers use surge protectors and a dedicated electrical circuit. In the event of a power failure, a spike in voltage may occur when the power is reinstated. This can damage the circuit board, which is not covered under warranty.
From $1,260.00
Unit price perThe Ideal-Air™ Pro Series Ultra Sonic Humidifier is designed with ultra-sonic transducers to supply ultra-fine water particles. This is to help form a more balanced humidity field over your plant's entire canopy. Ideal-Air™ Pro Series Ultra Sonic Humidifier plates are made from cold-rolled steel and a stainless steel box with a standard water inlet with overflow safety switch, reservoir drain outlet, sediment filter, LED display and humidity control (30%–90%). This unit is designed to produce up to 300 pints per day of ultra-fine mist. 115 V, 60 Hz and 7.8 Amps. We recommend all Ultra Sonic Humidifiers be ducted, using 4 in PVC or 4 in DWV plastic pipe works best. Units should not be run without ducting or the top of the unit may be covered in water and shut off. Please don’t fill the unit through the discharge piping outlets. Doing this will overfill the tank and prevent the unit from creating humidity. The unit should only be filled through the provided hose and float valve to ensure proper water level and correct operation.
The Ideal-Air™ Pro Series Ultra Sonic Humidifier is designed with ultra-sonic transducers to supply ultra-fine water particles. This is to help form a more balanced humidity field over your plant's entire canopy. Ideal-Air™ Pro Series Ultra Sonic Humidifier plates are made from cold-rolled steel and a stainless steel box with a standard water inlet with overflow safety switch, reservoir drain outlet, sediment filter, LED display and humidity control (30%–90%). This unit is designed to produce up to 600 pints per day of ultra-fine mist. 115 V, 60 Hz and 10.3 Amps. We recommend all Ultra Sonic Humidifiers be ducted, using 4 in PVC or 4 in DWV plastic pipe works best. Units should not be run without ducting or the top of the unit may be covered in water and shut off. Please don’t fill the unit through the discharge piping outlets. Doing this will overfill the tank and prevent the unit from creating humidity. The unit should only be filled through the provided hose and float valve to ensure proper water level and correct operation.
$25.00
Unit price perFrom $9.99
Unit price perINCREASER/REDUCER DUCTING
Transitions vent system to a larger diameter. Install in vertical orientation only. Additional configurations available upon request.
-Used to increase or decrease pipe size
-Durable galvanized steel construction
-Can be crimped if needed